|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SGS10N60RUFD April 2001 IGBT SGS10N60RUFD Short Circuit Rated IGBT General Description Fairchild's RUFD series of Insulated Gate Bipolar Transistors (IGBTs) provide low conduction and switching losses as well as short circuit ruggedness. The RUFD series is designed for applications such as motor control, uninterrupted power supplies (UPS) and general inverters where short circuit ruggedness is a required feature. Features * * * * * Short circuit rated 10us @ TC = 100C, VGE = 15V High speed switching Low saturation voltage : VCE(sat) = 2.2 V @ IC = 10A High input impedance CO-PAK, IGBT with FRD : trr = 42ns (typ.) Application AC & DC Motor controls, general purpose inverters, robotics, servo controls C G GCE TO-220F TC = 25C unless otherwise noted E Absolute Maximum Ratings Symbol VCES VGES IC ICM (1) IF IFM TSC PD TJ Tstg TL Description Collector-Emitter Voltage Gate-Emitter Voltage Collector Current Collector Current Pulsed Collector Current Diode Continuous Forward Current Diode Maximum Forward Current Short Circuit Withstand Time Maximum Power Dissipation Maximum Power Dissipation Operating Junction Temperature Storage Temperature Range Maximum Lead Temp. for soldering purposes, 1/8" from case for 5 seconds @ TC = 25C @ TC = 100C @ TC = 100C @ TC = 100C @ TC = 25C @ TC = 100C SGS10N60RUFD 600 20 16 10 30 12 92 10 55 22 -55 to +150 -55 to +150 300 Units V V A A A A A s W W C C C Notes : (1) Repetitive rating : Pulse width limited by max. junction temperature Thermal Characteristics Symbol RJC(IGBT) RJC(DIODE) RJA Parameter Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient Typ. ---Max. 2.3 3.7 62.5 Units C/W C/W C/W (c)2001 Fairchild Semiconductor Corporation SGS10N60RUFD Rev. A SGS10N60RUFD Electrical Characteristics of IGBT T Symbol Parameter C = 25C unless otherwise noted Test Conditions Min. Typ. Max. Units Off Characteristics BVCES BVCES/ TJ ICES IGES Collector-Emitter Breakdown Voltage Temperature Coeff. of Breakdown Voltage Collector Cut-off Current G-E Leakage Current VGE = 0V, IC = 250uA VGE = 0V, IC = 1mA VCE = VCES, VGE = 0V VGE = VGES, VCE = 0V 600 ----0.6 ----250 100 V V/C A nA On Characteristics VGE(th) VCE(sat) G-E Threshold Voltage Collector to Emitter Saturation Voltage IC = 10mA, VCE = VGE IC = 10A, VGE = 15V IC = 16A, VGE = 15V 5.0 --6.0 2.2 2.5 8.5 2.8 -V V V Dynamic Characteristics Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance VCE = 30V, VGE = 0V, f = 1MHz ---660 115 25 ---pF pF pF Switching Characteristics td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Eon Eoff Ets Tsc Qg Qge Qgc Le Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Short Circuit Withstand Time Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Internal Emitter Inductance --------------10 ----15 30 36 158 141 215 356 16 33 42 242 161 452 613 -30 5 8 7.5 --50 200 --500 --60 350 --860 -45 10 16 -ns ns nS ns J J J ns ns ns ns J J J s nC nC nC nH VCC = 300 V, IC = 10A, RG = 20, VGE = 15V, Inductive Load, TC = 25C VCC = 300 V, IC = 10A, RG = 20, VGE = 15V, Inductive Load, TC = 125C @ TC = VCC = 300 V, VGE = 15V 100C VCE = 300 V, IC = 10A, VGE = 15V Measured 5mm from PKG Electrical Characteristics of DIODE T Symbol VFM trr Irr Qrr Parameter Diode Forward Voltage Diode Reverse Recovery Time Diode Peak Reverse Recovery Current Diode Reverse Recovery Charge C = 25C unless otherwise noted Test Conditions TC = 25C IF = 12A TC = 100C TC = 25C TC = 100C IF = 12A, di/dt = 200A/s TC = 25C TC = 100C TC = 25C TC = 100C Min. --------- Typ. 1.4 1.3 42 60 3.5 5.6 80 220 Max. 1.7 -60 -6.0 -180 -- Units V ns A nC (c)2001 Fairchild Semiconductor Corporation SGS10N60RUFD Rev. A SGS10N60RUFD 40 35 30 Common Emitter T C = 25 30 20V 15V 25 12V Collector Current, IC [A] Collector Current, IC [A] Common Emitter VGE = 15V TC = 25 TC = 125 ------ 20 25 20 15 10 V GE = 10V 15 10 5 5 0 0 2 4 6 8 0 1 10 Collector - Emitter Voltage, VCE [V] Collector - Emitter Voltage, V CE [V] Fig 1. Typical Output Chacracteristics Fig 2. Typical Saturation Voltage Characteristics 4.0 16 Common Emitter V GE = 15V 14 20A 12 VCC = 300V Load Current : peak of square wave Collector - Emitter Voltage, V [V] CE 3.5 3.0 Load Current [A] 10 8 6 4 2.5 10A 2.0 IC = 5A 1.5 2 0 -50 0 50 100 150 Duty cycle : 50% TC = 100 Power Dissipation = 15W 0.1 1 10 100 1000 1.0 Case Temperature, T C [] Frequency [KHz] Fig 3. Saturation Voltage vs. Case Temperature at Variant Current Level Fig 4. Load Current vs. Frequency 20 Common Emitter TC = 25 20 Common Emitter T C = 125 Collector - Emitter Voltage, VCE [V] Collector - Emitter Voltage, V [V] CE 16 16 12 12 8 8 4 IC = 5A 0 0 4 8 20A 10A 20A 4 IC = 5A 0 10A 12 16 20 0 4 8 12 16 20 Gate - Emitter Voltage, V GE [V] Gate - Emitter Voltage, VGE [V] Fig 5. Saturation Voltage vs. VGE (c)2001 Fairchild Semiconductor Corporation Fig 6. Saturation Voltage vs. VGE SGS10N60RUFD Rev. A SGS10N60RUFD 1400 Common Emitter V GE = 0V, f = 1MHz T C = 25 Common Emitter V CC = 300V, V GE = 15V IC = 10A T C = 25 T C = 125 -----100 1200 Ton Capacitance [pF] Switching Time [ns] 1000 Cies 800 Tr 600 400 Coes 200 Cres 0 1 10 10 10 100 Collector - Emitter Voltage, VCE [V] Gate Resistance, R G [ ] Fig 7. Capacitance Characteristics Fig 8. Turn-On Characteristics vs. Gate Resistance 1000 Switching Time [ns] Common Emitter VCC = 300V, V GE = 15V IC = 10A TC = 25 TC = 125 ------ 1000 Toff Toff Tf Common Emitter VCC = 300V, VGE = 15V IC = 10A TC = 25 TC = 125 -----Eoff Eon Eoff Tf Switching Loss [uJ] 100 100 10 100 10 100 Gate Resistance, R G [ ] Gate Resistance, RG [ ] Fig 9. Turn-Off Characteristics vs. Gate Resistance Fig 10. Switching Loss vs. Gate Resistance 1000 Common Emitter V GE = 15V, RG = 20 T C = 25 T C = 125 -----Common Emitter VGE = 15V, RG = 20 TC = 25 TC = 125 -----Ton Switching Time [ns] 100 Switching Time [ns] Toff Tf Toff Tf 100 Tr 10 6 8 10 12 14 16 18 20 6 8 10 12 14 16 18 20 Collector Current, IC [A] Collector Current, IC [A] Fig 11. Turn-On Characteristics vs. Collector Current (c)2001 Fairchild Semiconductor Corporation Fig 12. Turn-Off Characteristics vs. Collector Current SGS10N60RUFD Rev. A SGS10N60RUFD 15 1000 Common Emitter VGE = 15V, RG = 20 TC = 25 TC = 125 ------ Gate - Emitter Voltage, VGE [ V ] Common Emitter RL = 30 TC = 25 VCC = 100 V 300 V 200 V 12 Switching Loss [uJ] 9 Eoff 6 100 Eon 3 0 5 10 15 20 0 10 20 30 Collector Current, IC [A] Gate Charge, Qg [ nC ] Fig 13. Switching Loss vs. Collector Current Fig 14. Gate Charge Characteristics 100 IC MAX. (Pulsed) 50us IC MAX. (Continuous) 1 50 Collector Current, IC [A] 100us Collector Current, I C [A] 10 10 1 DC Operation 0.1 Single Nonrepetitive Pulse T C = 25 Curves must be derated linearly with increase in temperature 0.1 1 10 100 1000 0.01 1 1 Safe Operating Area V GE = 20V, T C = 100 10 100 1000 Collector-Emitter Voltage, V CE [V] Collector-Emitter Voltage, V CE [V] Fig 15. SOA Characteristics Fig 16. Turn-Off SOA Characteristics 10 Thermal Response, Zthjc [/W] 0.5 1 0.2 0.1 0.05 0.1 0.02 0.01 Pdm t1 t2 single pulse 0.01 Duty factor D = t1 / t2 Peak Tj = Pdm x Zthjc + TC 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 Rectangular Pulse Duration [sec] Fig 17. Transient Thermal Impedance of IGBT (c)2001 Fairchild Semiconductor Corporation SGS10N60RUFD Rev. A SGS10N60RUFD 100 100 T C = 25 T C = 100 -----V R = 200V IF = 12A T C = 25 T C = 100 ------ Reverse Recovery Current, I rr [A] Forward Current, I F [A] 10 10 1 0 1 2 3 1 100 1000 Forward Voltage Drop, VFM [V] di/dt [A/us] Fig 18. Forward Characteristics Fig 19. Reverse Recovery Current 600 100 V R = 200V IF = 12A T C = 25 T C = 100 -----VR=200V IF=12A TC = 25 TC = 100 ------ Stored Recovery Charge, Qrr [nC] 400 Reverce Recovery Time, t rr [ns] 1000 500 80 60 300 40 200 100 20 0 100 0 100 1000 di/dt [A/us] di/dt [A/us] Fig 20. Stored Charge Fig 21. Reverse Recovery Time (c)2001 Fairchild Semiconductor Corporation SGS10N60RUFD Rev. A SGS10N60RUFD Package Dimension TO-220F (FS PKG CODE AQ) 3.30 0.10 10.16 0.20 (7.00) o3.18 0.10 2.54 0.20 (0.70) 6.68 0.20 15.80 0.20 (1.00x45) MAX1.47 9.75 0.30 0.80 0.10 (3 ) 0 0.35 0.10 2.54TYP [2.54 0.20] #1 0.50 -0.05 2.54TYP [2.54 0.20] 4.70 0.20 +0.10 2.76 0.20 9.40 0.20 Dimensions in Millimeters (c)2001 Fairchild Semiconductor Corporation SGS10N60RUFD Rev. A 15.87 0.20 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM DISCLAIMER FAST(R) FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench(R) QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SLIENT SWITCHER(R) SMART STARTTM Star* PowerTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM UltraFET(R) VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production (c)2001 Fairchild Semiconductor Corporation Rev. H1 |
Price & Availability of SGS10N60RUFD |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |